Phone: +49 2103 - 25 25 40 - 0 I info@verdos.net I Zur deutschen Sprachversion Deutsch I GTC

FILDOMAT – Fluid-polymer system for batch mode

The FILDOMAT PP is a fluid-polymer solving-appliance which functions on the inline-dilution principle and is used to produce super-effective, ready-to-use polymer solution automatically. This is where the stock polymer and water are mixed in an inverter unit to form a ready-to-use solution. High-precision dosage is realised using an eccentric-screw pump. When the solution is mixed it is piped to an intermediate storage tank (the solution tank) from where dose distribution is executed.

Relative to the level in the solution tank the FILDOMAT automatically prepares a sufficient amount of solution to guarantee an interruption-free supply of stock polymer. When the solution level reaches the maximum detector electrode the unit shuts down and restarts when the solution level reaches the minimum-contact electrode. When the polymer solution is injected directly the unit is controlled remotely using a potential-free contact. This makes it unnecessary to control the unit manually while in operation.

The FILDOMAT is delivered as a self-contained unit and includes all piping, fittings and wiring, a switch and control cabinet tested to VDE/UVV Guidelines. The only other requirements for operation are water and electricity supply connection.

VERDOS offers the FILDOMAT in a variety of automated versions that are custom-built to suit your exact requirements. As well as the features listed below, we offer you a variety of options to accommodate your requirements even better. We manufacture all the devices a range of models. Please refer to the technical data sheets for further information.

FILDOMAT PP

Fildomat PPThe FILDOMAT PP has been developed for fully-automated batch mode operation. The polymer (e.g. a flocculation agent [FA]) is injected directly into the inverter unit / mixing system using an eccentric-screw pump controlled by a frequency converter and a PID software controller.

The dosing control built into the delivery line of the stock polymer pump guarantees a precise supply of stock polymer into the inverter unit. The automatic control mechanism built into the water flow path (control valve plus electromagnetic flowmeter) ensures a consistent water flow even if the water pressure fluctuates. The pressure booster pump ensures consistent energy input in the inverter unit.

Overall unit control is effected via PLC. At the control panel (membrane keyboard) FA and dissolver water parameters are set and kept at constant levels exactly with the aid of a PID software controller. This guarantees the production of a consistent solution concentration.

Please refer to the technical data sheets for further information

FILDOMAT MC

Fildomat MCThe FILDOMAT MC has been developed for fully-automated batch mode operation. The polymer (e.g. a flocculation agent FA) is injected directly into the inverter unit / mixing system using an eccentric-screw pump controlled by a frequency converter and a PID software controller.
The dosing control built into the delivery line of the stock polymer pump guarantees a highly exact supply of stock polymer into the inverter unit.
The automatic control mechanism built into the water flow path (control valve plus electromagnetic flowmeter) ensures a consistent water flow even if the water pressure fluctuates.

The solving water equipment with pneumatic valve and pressure reduction, particle flowmeter with minimum-contact switch as well as a downstream pressure booster maintain a constant water supply and energy application at the inverter.

Overall unit control is effected via a modern PLC with a 2-line display to control and monitor process function and for malfunction messages.

Please refer to the technical data sheets for further information

FILDOMAT LC

Fildomat LCThe FILDOMAT LC is a robust, value-for-money appliance for automatic batch mode operation. Polymer dosage is realised using a manually operated eccentric-screw pump.

High-precision dosing is set using a calibration cylinder. The solving water equipment with pneumatic valve and pressure reduction, particle flowmeter with minimum-contact switch maintain a constant water supply at the inverter. Optionally available is a downstream pressure booster for improved water supply and a flow monitor in the stock polymer waterline.

Conventional control mechanisms ensure a high degree of reliability and simple maintenance.

Please refer to the technical data sheets for further information

Do you have any questions?

We would be pleased to answer your questions.

Our service includes consulting, project conception, realization, commissioning, full-service and financing!

Contact form

Contact and location

Verdos GmbH
Process  & Dosage Technology
Bahnhofsallee 17
40721 Hilden

Phone:+49 2103 - 25 25 40 - 0
Fax:+49 2103 - 25 25 40 - 10
E-Mail:info@verdos.net

Please use Google Maps for routing.

Routing